I would like to...

 

Declaration of consent regarding data protection

We would like to inform you about our products and innovations and kindly ask you to agree to your data being used for this purpose. Your data will be treated carefully and confidentially. Data transfer to third parties shall occur only if this is required by law or if this is absolutely necessary to fulfill the purpose for which the data has been recorded.

This declaration of consent also authorizes all other DENTAURUM companies.

I agree that you may contact me for the purpose mentioned in the following way (please tick):

I have been informed that I can revoke my consent at any moment by sending my revocation to DENTAURUM.

  • by post to: DENTAURUM GmbH & Co. KG, Turnstr. 31, 75228 Ispringen, Germany or to the DENTAURUM affiliate responsible for my country or a DENTAURUM representative
  • by e-mail to revocation@dentaurum.com
  • by fax + 49 72 31 / 803 315

Book a LIVE
DEMO now. >>

Order online
ceraMotion® One Touch Academy
Chat with us!
Choose your country
 
English
ceraMotion® Z

ceraMotion® Z
One solution for all requirements.

Watch trailer Overview Ceramics

"Our team consists of materials scientists, engineers specializing in biomaterials and dental technicians. They are constantly looking for new developments that are important for the dental market, both in the medium and the long-term.

We are delighted to welcome a new ceraMotion® family member:

ceraMotion® Z

Zirconium oxide is the first choice in materials for highly aesthetic prosthetic restorations due to its many possible uses, its biocompatibility and its visual shade matching ability. For many years we have been working intensely on building up the ceraMotion® portfolio.

We are working hard to develop high-quality materials for the digital ceramic restoration market. We use the best ceramic raw materials from Europe and Asia."

Dr. Francois Lelievre
PhD. Material Science
President Dentaurum Ceramics

"Zirconium oxide - the first choice for
prosthetic restorations which place the
highest demands
on material properties and aesthetics."

One solution for all requirements.

The six different ceraMotion® Z blanks cover all zirconium oxide-based indications and offer maximum reliability in shading and processing. State-of-the-art materials technology within a logical overall concept makes ceraMotion® Z the smart choice for natural all-ceramic restorations, created to meet high demands.

In particular, the multi-shaded, multi-layered zirconium oxide ceraMotion® Z Hybrid is a truly multi-purpose material.
In one blank, it combines the aesthetics of a 1000 MPa zirconium oxide with the strength of a tetragonal, highly translucent zirconium oxide. ceraMotion® Z Hybrid is pure aesthetics and suitable for all work in the anterior and posterior tooth area.

 

ceraMotion® Z
Hybrid

Flexural strength
1300 - 1020 MPa

Sintering temperature
1480°C

Translucency
44% – 47%

Available colors
Bleach 1, Bleach 2, A1, A2, A3, A3,5, A4, B1, B2, C2

Diameter ø
98,3

Available heights (mm)
14, 18, 22

Zirconium oxide type
strong
ultra-highly translucent
multi-shaded

Indications
Inlay
Veneer
Single crown
Bridges up to 14 units

 

 

More Info

ceraMotion® Z
Cubic Multishade

Flexural strength
600 MPa

Sintering temperature
1450°C

Translucency
49%

Available colors
A1, A2, A3, A3,5, A4, B1, B2, C2, D2
 

Diameter ø
98,3

Available heights (mm)
14, 18, 22

Zirconium oxide type
ultra-highly translucent
multi-shaded
 

Indications
Inlay
Veneer
Single crown
Bridges up to 3 units
 

 

 

More Info

ceraMotion® Z
HT Multishade

Flexural strength
1100 MPa

Sintering temperature
1530°C

Translucency
44% – 47%

Available colors
A1, A2, A3 A3,5, A4, B1, B2, C2, D2
 

Diameter ø
98,3

Available heights (mm)
14, 18, 22, 25

Zirconium oxide type
strong
highly translucent
multi-shaded
 

Indications
Inlay
Veneer
Single crown
Bridges up to 14 units

 

 

More Info

ceraMotion® Z
HT Shade

Flexural strength
1100 MPa

Sintering temperature
1530°C

Translucency
43%

Available colors
A1, A2, A3, A3,5, A4, B1, B2, B3, B4, C1, C2,C3, C4, D2, D3, D4

Diameter ø
98,3

Available heights (mm)
14, 18, 22, 25

Zirconium oxide type
strong
highly translucent
shaded
 

Indications
Inlay
Veneer
Single crown
Bridges up to 14 units

 

 

More Info

ceraMotion® Z
HT White

Flexural strength
1200 MPa

Sintering temperature
1530°C

Translucency
43%

Available colors
white

 

Diameter ø
98,3

Available heights (mm)
14, 18, 22, 25

Zirconium oxide type
strong
highly translucent
white
 

Indications
Inlay
Veneer
Single crown
Bridges up to 14 units

 

 

More Info

ceraMotion® Z
White

Flexural strength
1200 MPa

Sintering temperature
1530°C

Translucency
39%

Available colors
white

 

Diameter ø
98,3

Available heights (mm)
14, 18, 22, 25

Zirconium oxide type
strong
highly translucent
multi-shaded
 

Indications
Inlay
Veneer
Single crown
Bridges up to 14 units

 

 

More Info

ceraMotion® Z Hybrid

Strong, aesthetic & multi-shaded.

The multi-shaded, multi-layered zirconium oxide ceraMotion® Z Hybrid is a truly multi-purpose material. In one blank, it combines the aesthetics of a cubic zirconium oxide with the strength of a highly translucent zirconium oxide. ceraMotion® Z Hybrid is pure aesthetics and suitable for all work in the anterior and posterior region. By means of a special high-tech process, two different zirconium oxide materials are processed in one blank. ceraMotion® Z Hybrid is available in the 9 most popular V-shades and 2 bleach shades and offers reliable shade reproduction.

The machinability of ceraMotion® Z Hybrid is excellent and the material is suitable for all open CAD/CAM systems. We primarily recommend this material for monolithic work that is aesthetically demanding, and for finishing with a ceramic paste (e.g. ceraMotion® One Touch). It is also possible to continue processing with a classic veneering ceramic (e.g. ceraMotion® Zr).

Product advantages:

  • Reliable reproducibility for high-level aesthetics
  • Multiple indications due to high strength in the dentin area
  • Natural and smooth shade transitions from cervical to incisal
  • Available in the 9 most popular V-shades + 2 bleach shades
  • Excellent machinability
  • Recommended sintering temperature 1480 °C / 2696 °F
  • Translucency 44% – 48% (non-shaded, 1 mm)
  • Optimum finishing with ceraMotion® One Touch

Technical data

Type II class 5 dental ceramic according to EN ISO 6872
Shades: Bleach 1, Bleach 2, A1, A2, A3, A3.5, A4, B1, B2, C2

  • Material: ZrO2 3Y-TZP  4Y-PSZ
  • Diameter: 98,3 mm
  • Flexural strength: (biaxial) 1300 MPa -> 1.020 MPa
  • Density: > 6,04 g/cm3
  • Radio activity: < 0,02 Bq/g
  • Solubility: < 20 μg/cm²
  • CTE: 10,5 x 10-6 K-1

Chemical composition ceraMotion® Z Hybrid

 

ZrO2+HfO2+Y2O3 Y2O3 Al2O3 Fe2O3 Er2O3 further oxides
> 96.5% 5.8% - 9.7% < 0.5% < 0.5% < 2.0% < 0.5%

 

Notified body: mdc GmbH

These values were measured on test samples and are typical for the material. The product properties may, however, deviate from these values depending on the component design and the forming process.

ceraMotion® Z Cubic Multishade

Ultra-highly translucent and multi-shaded.

The multi-shaded, pre-shaded and ultra-highly translucent zirconium oxide ceraMotion® Z Cubic Multishade is suitable for inlays, veneers, single crowns and 3-unit bridges.

With a translucency of 49%, the restoration shows natural light dynamics after sintering and meets the highest aesthetic demands.

ceraMotion® Z Cubic Multishade is available in the 9 most popular V-shades and offers reliable shade reproduction. The machinability of ceraMotion® Z Cubic Multishade is excellent and the material is suitable for all open CAD/CAM systems. We primarily recommend this material for monolithic work that is aesthetically demanding. It can be finished with a speedy, yet aesthetic veneering using a ceramic paste (e.g. ceraMotion® One Touch). It is also possible to continue processing with a classic veneering ceramic (e.g. ceraMotion® Zr). 49 % translucency 5Y-PSZ The symbol for smarter zirconia multi-shaded A1 A2 A3 A3.5 A4 B1 B2 C2 D2 14

 

Product advantages:

  • Reliable reproducibility for high-level aesthetics.
  • Natural and smooth shade transitions from cervical to incisal.
  • Available in the 9 most popular V-shades.
  • Particularly suitable for inlays, onlays, monolithic crowns and 3-unit bridges.
  • Excellent machinability.
  • Recommended sintering temperature 1450 °C / 2642 °F.
  • Translucency 49% (non-shaded, 1 mm).
  • Optimum finishing with ceraMotion® One Touch.

Technical data

Type II class 4 dental ceramic according to EN ISO 6872
Shades: A1, A2, A3, A3.5, A4, B1, B2, C2, D2

  • Material: ZrO2 5Y-PSZ
  • Diameter: 98,3 mm
  • Flexural strength: (Biaxial) 600 MPa
  • Density: > 6,04 g/cm3
  • Radio activity: < 0,02 Bq/g
  • Solubility: < 100 μg/cm²
  • CTE: 10,5 x 10-6 K-1

Chemical composition ceraMotion® Z Cubic Multishade

 

ZrO2+HfO2+Y2O3 Y2O3 Al2O3 Fe2O3 Er2O3 further oxides
> 96.5% 5.8% - 9.7% < 0.5% < 0.5% < 2.0% < 0.5%

 

Notified body: mdc GmbH

These values were measured on test samples and are typical for the material. The product properties may, however, deviate from these values depending on the component design and the forming process.

 

ceraMotion® Z HT Multishade

Strong, highly translucent and multi-shaded.

The multi-shaded, pre-shaded and highly translucent zirconium oxide ceraMotion® Z HT Multishade is suitable for all work in the anterior and posterior area.

The high strength of more than 1200 MPa (biaxially) offers maximum safety from the single crown to multi-element restorations or implant sub-structures. After sintering, the multi-layer shaded blank shows the natural shade gradient from the dentin to the incisal area, in a flowing gradient.

ceraMotion® Z HT Multishade is available in the 9 most popular V-shades and offers reliable reproducibility whilst meeting high aesthetic demands.

The machinability of ceraMotion® Z HT Multishade is excellent and the material is suitable for all open CAD/CAM systems. We primarily recommend this material for monolithic work that is aesthetically demanding. It can be finished with a speedy, yet aesthetic veneering using a ceramic paste (e.g. ceraMotion® One Touch). It is also possible to continue processing with a classic veneering ceramic (e.g. ceraMotion® Zr).

 

Product advantages:

  • Natural and smooth shade transitions from cervical to incisal.

  • Highly efficient (no preshading required).

  • Reliable reproducibility of the classic V-shades for high aesthetic demands.

  • Multiple indications due to high strength.

  • Particularly suitable for monolithic crowns and bridges.

  • Excellent machinability, recommended sintering temperature 1530 °C / 2786 °F.

  • Translucency 43% (non-shaded, 1 mm).

  • Optimum finishing with ceraMotion® One Touch.

Technical data

Type II class 5 dental ceramics according to EN ISO 6872
Shades: A1, A2, A3, A3.5, A4, B1, B2, C2, D2

  • Material: ZrO2 3Y-TZP
  • Diameter: 98,3 mm
  • Flexural strength: (Biaxial) 1.100 MPa
  • Density: > 6,08 g/cm3
  • Radio activity: < 0,02 Bq/g
  • Solubility: < 10 μg/cm²
  • CTE: 10,5 x 10-6 K-1

Chemical composition ceraMotion® Z HT Multishade

 

ZrO2+HfO2+Y2O3 Y2O3 Al2O3 Fe2O3 Er2O3 further oxides
> 97.7% 4.4% - 5.5% < 0.5% < 0.3% < 1.0% < 1.2%

 

Notified body: mdc GmbH

These values were measured on test samples and are typical for the material. The product properties may, however, deviate from these values depending on the component design and the forming process.

ceraMotion® Z HT Shade

Strong, highly translucent and shaded.

The monochrome, preshaded and highly translucent zirconium oxide ceraMotion® Z HT Shade is suitable for all work in the anterior and posterior area.

The high strength of more than 1200 MPa (biaxially) offers maximum safety from the single crown to multi-element restorations or implant sub-structures. The blanks have already been shaded homogeneously, making it possible to work highly efficiently, since aesthetic individualization can begin immediately after sintering. The good shading of the blanks ensures a reliable reproducibility of all V-Classic shades.

The machinability of ceraMotion® Z HT Shade is excellent and the material is suitable for all open CAD/CAM systems. We primarily recommend this material for monolithic work. It can be finished with a speedy, yet aesthetic veneering using a ceramic paste (e.g. ceraMotion® One Touch). It is also possible to continue processing with a classic veneering ceramic (e.g. ceraMotion® Zr).

Product advantages:

  • Highly efficient (no preshading required).
  • Ensures consistent shade results thanks to pre-shaded blanks.
  • Reliability due to very high strength.
  • Particularly suitable for monolithic crowns and bridges.
  • Excellent machinability, recommended sintering temperature 1530 °C / 2786 °F.
  • Translucency 43% (non-shaded, 1 mm).
  • Optimum finishing with ceraMotion® One Touch.

Technical data

Type II class 5 dental ceramics according to EN ISO 6872
Shades: A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4

  • Material: ZrO2 3Y-TZP
  • Diameter: 98,3 mm
  • Flexural strength: (Biaxial) 1.100 MPa
  • Density: > 6,08 g/cm3
  • Radio activity: < 0,02 Bq/g
  • Solubility: < 10 μg/cm²
  • CTE: 10,5 x 10-6 K-1

Chemical composition ceraMotion® Z HT Shade

 

ZrO2+HfO2+Y2O3 Y2O3 Al2O3 Fe2O3 Er2O3 further oxides
> 97.7% 4.4% - 5.5% < 0.5% < 0.3% < 1.0% < 1.2%

 

Notified body: mdc GmbH

These values were measured on test samples and are typical for the material. The product properties may, however, deviate from these values depending on the component design and the forming process.

ceraMotion® Z HT White

Strong & highly translucent.

This classic, highly translucent and reliable zirconium oxide ceraMotion® Z HT White is suitable for all work in the anterior and posterior area.

The high strength of more than 1200 MPa (biaxially) offers high safety from the single crown to multi-element restorations or implant sub-structures. Due to the increased translucency of 43%, ceraMotion® Z HT White is the optimal basis for the production of aesthetic restorations.

The machinability of ceraMotion® Z HT White is excellent and the material is suitable for all open CAD/CAM systems. We recommend this material primarily as a framework material for classic veneering (e.g. with ceraMotion® Zr).

Product advantages:

  • Reliability due to very high strength.
  • Excellent machinability.
  • Suitable for shading.
  • Recommended sintering temperature 1530 °C / 2786 °F.
  • Translucency 43% (non-shaded, 1 mm).
  • Optimum finishing/veneering with ceraMotion® Zr.

Technical data

Type II class 5 dental ceramic according to EN ISO 6872

  • Material ZrO2 3Y-TZP-A
  • Diameter 98.3 mm
  • Flexural strength (biaxial) 1200 MPa
  • Density > 6.06 g/cm3
  • Radio activity < 0.02 Bq/g
  • Solubility < 10 µg/cm²
  • CTE 10.5 x 10-6 K-1

 

Chemical composition ceraMotion® Z HT White

 

ZrO2+HfO2+Y2O3 Y2O3 Al2O3 further oxides
> 99.0% 4.5% - 6.0% < 0.5% < 0.5%

 

Notified body: mdc GmbH

These values were measured on test samples and are typical for the material. The product properties may, however, deviate from these values depending on the component design and the forming process.

ceraMotion® Z White

Strong & proven.

The proven and reliable 3Y-TZP- A high-performance zirconium oxide is suitable for all work in the anterior and posterior area.

The high strength of over 1200 MPa (biaxially) offers a high level of safety, particularly for multi-element restorations or stable implant sub-structures. Due to the reduced translucency of 39%, ceraMotion® Z White allows the optimal masking of discolored stumps and metal abutments.

The machinability of ceraMotion® Z White is excellent and the material is suitable for all open CAD/CAM systems. We recommend this material primarily as a framework material for classic veneering (e.g. with ceraMotion® Zr).

Product advantages:

  • Reliability due to very high strength
  • Stump/abutment masking possible due to reduced translucency
  • Excellent machinability
  • Suitable for shading
  • Recommended sintering temperature 1530 °C / 2786 °F
  • Translucency 39% (non-shaded, 1 mm)
  • Optimum finishing/veneering with ceraMotion® Zr

Technical data

Type II class 5 dental ceramic according to EN ISO 6872

  • Material ZrO2 3Y-TZP
  • Diameter 98.3 mm
  • Flexural strength (biaxial) 1200 MPa
  • Density > 6.06 g/cm3
  • Radio activity < 0.02 Bq/g
  • Solubility < 10 µg/cm²
  • CTE 10.5 x 10-6 K-1

Chemical composition ceraMotion® Z White

 

ZrO2+HfO2+Y2O3 Y2O3 Al2O3 further oxides
> 99.0% 4.5% - 6.0% < 0.5% < 0.5%

 

Notified body: mdc GmbH

These values were measured on test samples and are typical for the material. The product properties may, however, deviate from these values depending on the component design and the forming process.

 

Making good use of synergies.

The ceraMotion® products can be combined with one another very efficiently. The processing technology and the choice of material combinations within the ceraMotion® product range can be individually adapted to the respective case and freely selected.

Both ceraMotion® Zr veneering ceramic and the unique ceramic paste ceraMotion® One Touch harmonize perfectly with lithium disilicate (ceraMotion® LiSi) and zirconium oxide (ceraMotion® Z).

 

Zirconium oxide blanks

The wide choice of ceraMotion® Z zirconium oxide blanks offers a full range of aesthetic, all-ceramic materials in a wide variety of shades, translucencies and strengths.

  • ceraMotion® Z Hybrid
  • ceraMotion® Z Cubic Multishade
  • ceraMotion® Z HT Multishade
  • ceraMotion® Z HT Shade
  • ceraMotion® Z HT White
  • ceraMotion® Z White

 

 

 

 

Finishing pastes

ceraMotion® One Touch is the first veneering ceramic in paste form. These are 2D and 3D pastes that have been specially developed for the pink and white aesthetics of all-ceramic restorations made of lithium disilicate and zirconium oxide.

 

 

my first ceramic in paste

ceraMotion® LiSi                      Finished with
before finishing process           ceraMotion® One Touch

Veneering ceramics

Veneering ceramic for frameworks in zirconium oxide and lithium disilicate

  • Low firing temperature of 750 °C /1382 °F.
  • High shade vitality, even in the case of multiple
    firings.
  • Homogeneous and bright ceramics already after the
    first dentin firing.
  • Maximum bonding strength with zirconium oxide
    frameworks thanks to ideal CTE setting.
  • Natural aesthetics due to special masses for
    opalescence, fluorescence and translucency.

 

 

 

 

Aesthetics from one source.

"The design – be it monolithic, cut-back, partially or fully veneered always depends on the patient case to be treated. From my experience, it is of great advantage if the framework material and the veneering ceramics come from a single source, because only the manufacturer knows the shadings and can match them perfectly."

ZTM Werner Gotsch

 

 


© Werner Gotsch, Master dental technician

 

„Patient satisfaction is the best recommendation for my practice. For many years now, all-ceramic solutions have been a central component for producing highly aesthetic prosthetic restorations. ceraMotion® Z Hybrid – a new milestone".“

Dr. med. dent. Claus-Bertram Triebel

 

 

 

Restoration crown 11 made of ceraMotion® Z Hybrid, ceraMotion® Zr and ceraMotion® One Touch.

Book a LIVE DEMO now.

Book an appointment for a free
LIVE DEMO and learn about the advantages of ceraMotion®!

Nothing beats your own personal impression. Use the contact form to arrange for your personal ceraMotion® expert to come into your company.

 

Book an appointment for a
LIVE DEMO now. >>

Courses & Events

 

Title / Description Date Location Speaker Language

Finition avec les pâtes ceraMotion® One Touch

Dans ce webinaire, vous découvrirez les avantages de ceraMotion® One Touch / No Limits et Pink.

- Présentation des pâtes de finition
- Gamme de produits
- Applications potentielles en théorie et en pratique


Nous traiterons vos données personnelles avec soin et en toute confidentialité en respectant les directives en matière de protection des données. Le transfert de ces données à des tiers se fait exclusivement sur la base des dispositions légales ou si cela est impérativement nécessaire pour atteindre la finalité de leur collecte. Pour plus d'informations sur la protection des données, veuillez consulter notre déclaration sur la protection des données. Lien : https://www.dentaurum.de/fra/datenschutz-31174.aspx

Watch recording

Date
-

Ort
Lauf (bei Nürnberg),

Speaker

ZT François Hartmann - Dentaurum Zahntechnik

ZT François Hartmann - Dentaurum Zahntechnik

Professional history
1983 Abitur
1986 – 1991 Ausbildung zum Zahntechniker, Tätigkeit im gewerblichen Labor
seit 1991 Mitarbeiter der Firma Dentaurum als Zahntechniker im prothetischen Anwendungslabor
Field of activity

Zahntechnische Fachvorträge und Kurse im In- und Ausland.

Courses
  • Kronen und Brücken – edelmetallfrei
  • Laserschweiß-Info-Nachmittag
  • Laserschweiß-Grundkurs
  • Laserworkshop
  • KFO-Laserschweißen

Language
French

Cost

Excl. VAT

- Lauf (bei Nürnberg)
ZT François Hartmann - Dentaurum Zahntechnik

ZT François Hartmann - Dentaurum Zahntechnik

Professional history
1983 Abitur
1986 – 1991 Ausbildung zum Zahntechniker, Tätigkeit im gewerblichen Labor
seit 1991 Mitarbeiter der Firma Dentaurum als Zahntechniker im prothetischen Anwendungslabor
Field of activity

Zahntechnische Fachvorträge und Kurse im In- und Ausland.

Courses
  • Kronen und Brücken – edelmetallfrei
  • Laserschweiß-Info-Nachmittag
  • Laserschweiß-Grundkurs
  • Laserworkshop
  • KFO-Laserschweißen
French Watch recording

Magic in a Jar - with ceraMotion®

Watch recording

Date
-

Ort
Lauf (bei Nürnberg),

Speaker

Terry Whitty

Terry Whitty

Professional history

Dental technician, dental technology consultant
Since 1988

Owner and founder of FABDENT dental laboratory and supply company

FABDENT specialises in high tech manufacturing using the latest advances in intra- and extra-oral scanning, CAD/CAM, milling, grinding and 3D printing, covering most specialties including orthodontics, fixed and removable prosthetics, computerised implant planning and guidance, TMD, sleep appliances and paediatrics.

Author of over 150 internationally published articles.
Field of activity

Regular international lectures on a variety of dental technology and material science subjects.

Courses

Language
English

Cost

Excl. VAT

- Lauf (bei Nürnberg)
Terry Whitty

Terry Whitty

Professional history

Dental technician, dental technology consultant
Since 1988

Owner and founder of FABDENT dental laboratory and supply company

FABDENT specialises in high tech manufacturing using the latest advances in intra- and extra-oral scanning, CAD/CAM, milling, grinding and 3D printing, covering most specialties including orthodontics, fixed and removable prosthetics, computerised implant planning and guidance, TMD, sleep appliances and paediatrics.

Author of over 150 internationally published articles.
Field of activity

Regular international lectures on a variety of dental technology and material science subjects.

Courses
English Watch recording

Die Form, die Form, die Form... und nochmal: die Form

Was er uns damit sagen möchte ist, dass die Form der entscheidende Faktor ist, welche die Restauration im natürlichen Umfeld harmonisch erscheinen lässt. Das Auge verzeiht vielleicht eine nicht ganz getroffene Farbe aber niemals eine unnatürliche Form. In diesem Kurs werden die Grundlagen der Morphologie eines Zahnes mit seinen anatomischen Merkmalen vermittelt. Aber auch, wie man durch einen gezielten Auftrag die Morphologie eines Zahnes verstärken, aber auch abschwächen kann. Denn dadurch erst erhält der Zahn seine ganz individuelle Charakteristik und macht ihn unverwechselbar. Was der Natur ganz einfach und spielend gelingt, müssen wir bei Imitation der Natur also bei der Herstellung unserer Restaurationen, stark "übertreiben". Dann wird es vom Auge unbewusst als natürlich empfunden. Die Merkmale werden im Kurs erlernt, um sie dann praktisch umzusetzen. Wir trainieren das Wechselspiel zwischen Erhebungen und Vertiefungen in Verbindung mit der Oberfl äche und der Struktur anhand eines Wurzelzahnes und eines zentralen Incisiven.

Information & registration

Termin
18.10.2024 - 19.10.2024

Ort
CDC, Ispringen, Deutschland

Referent

ZTM Haristos Girinis

ZTM Haristos Girinis

Professional history

Geschäftsinhaber Girinis Dentaldesign, Nagold

Spezialisierung auf individuelle, hochwertige Zahntechnik

Stetige Weiterbildung ( u. a. bei Prof. Alexander Gutowski, ZTM Rainer Semsch, Betrand Thiévant, Klaus Mütherthies)

Zahlreiche Publikationen
Field of activity

Subject-specific courses and lectures in the field of highly aesthetic and functional dental technology

Courses

Sprache
German

Gebühr
1049,00
Excl. VAT

18.10.2024 - 19.10.2024 CDC, Ispringen
Deutschland
ZTM Haristos Girinis

ZTM Haristos Girinis

Professional history

Geschäftsinhaber Girinis Dentaldesign, Nagold

Spezialisierung auf individuelle, hochwertige Zahntechnik

Stetige Weiterbildung ( u. a. bei Prof. Alexander Gutowski, ZTM Rainer Semsch, Betrand Thiévant, Klaus Mütherthies)

Zahlreiche Publikationen
Field of activity

Subject-specific courses and lectures in the field of highly aesthetic and functional dental technology

Courses
German Information & registration

OVER THE LIMIT... unbegrenzte Möglichkeiten mit ceraMotion®

Dieses exklusive Seminar ist für erfahrene Zahntechniker konzipiert, die ihr Wissen und ihre Fähigkeiten im Bereich Keramik erweitern und sich als Experten auf dem Gebiet der ästhetischen Zahntechnik positionieren möchten. Haristos Girinis begleitet Sie zwei Tage durch die Welt der Keramikrestauration in einer modernen und inspirierenden Lernumgebung mitten im Pfälzer Wald. Darüber hinaus werden wir uns mit den neuesten Entwicklungen und Innovationen in der Keramiktechnologie befassen und darüber diskutieren, wie sich diese, neben der bewährten Schichttechnik, als Alternativen für anspruchsvolle, vollkeramische Restaurationen etablieren können. Am Freitagabend lassen wir den Tag gemeinsam in gemütlicher Atmosphäre bei köstlichen Pfälzer Spezialitäten ausklingen.

Information & registration

Termin
15.11.2024 - 16.11.2024

Ort
Hauenstein, Deutschland

Referent

ZTM Haristos Girinis

ZTM Haristos Girinis

Professional history

Geschäftsinhaber Girinis Dentaldesign, Nagold

Spezialisierung auf individuelle, hochwertige Zahntechnik

Stetige Weiterbildung ( u. a. bei Prof. Alexander Gutowski, ZTM Rainer Semsch, Betrand Thiévant, Klaus Mütherthies)

Zahlreiche Publikationen
Field of activity

Subject-specific courses and lectures in the field of highly aesthetic and functional dental technology

Courses

Language
German

Cost
1195,00€
Excl. VAT

15.11.2024 - 16.11.2024 Hauenstein
Deutschland
ZTM Haristos Girinis

ZTM Haristos Girinis

Professional history

Geschäftsinhaber Girinis Dentaldesign, Nagold

Spezialisierung auf individuelle, hochwertige Zahntechnik

Stetige Weiterbildung ( u. a. bei Prof. Alexander Gutowski, ZTM Rainer Semsch, Betrand Thiévant, Klaus Mütherthies)

Zahlreiche Publikationen
Field of activity

Subject-specific courses and lectures in the field of highly aesthetic and functional dental technology

Courses
German Information & registration

More Ceramic Courses, Events, LIVE Webinars and Webinars On Demand: Overview & registration.

 

Ceramic solutions – made by Dentaurum.

Under the successful umbrella brand ceraMotion®, Dentaurum Ceramics produces more than 1500 products in
compliance with the highest quality standards.

These include products from all areas for modern all-ceramic restorations - from the framework material to the glaze.

Monolithic, cut-back, partially or fully veneered

The manufacturing method depends on the patient case to be treated. Whatever the technology, ceraMotion® has the right answer for all methods.

Paste Ceramics

Lithium Disilicate

Glaze Pastes


PasteGlaze


PasteGlazeBright

Veneering Ceramics

Zirconium Oxide

Downloads

Product information and more...

 

All downloads for ceraMotion® Z you will find in our download center.

Dentaurum. Quality. Worldwide. Unique.


Online-Shop

DENTAURUM DIGITAL

To the online shop

Order platform

Available products:

  • prime4me® Aligner
  • prime4me® Model printing
  • prime4me® RETAIN3R

A la tienda en línea

Plataforma de pedido:

Productos disponibles:

  • prime4me® Aligner
  • Impresión de modelos prime4me®
  • prime4me® RETAIN3R

 

VERS LA BOUTIQUE EN LIGNE

Plateforme de commande

Produits disponibles :

  • prime4me® Aligner
  • Impression de modèles prime4me®
  • prime4me® RETAIN3R